# Question about highlighting a fixture

**URL:** <https://vistaforum.chroma-q.com/t/question-about-highlighting-a-fixture/627>\
**Category:** Vista 3 Releases\
**Created:** [February 10, 2019, 12:25pm UTC](https://vistaforum.chroma-q.com/t/question-about-highlighting-a-fixture/627 "2019-02-10T12:25:31Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MarkSeibert](https://avatars.discourse-cdn.com/v4/letter/m/76d3ee/32.png) [@MarkSeibert](https://vistaforum.chroma-q.com/u/MarkSeibert)\
**Post date:** [February 10, 2019, 12:25pm UTC](https://vistaforum.chroma-q.com/t/question-about-highlighting-a-fixture/627/1 "2019-02-10T12:25:31Z")

</div>

Hey All,

I’m new to the forum, and this is my first post. I have a question that I assume will be simple for someone to answer:

I’ve been using Vista V3 for about 6 months now, and a new behavior has cropped up and I don’t know how to undo what I have done. The behavior used to be that if I clicked on a fixture that on the right panel I would see the way the fixture is currently set. What is happening now is that anything I click on goes to 100%. I then have to click in the setttings panel to reset it to what is was set to. OR if I unhighlight it the fixture will go back to it’s settings.

I assume there is a way to get this to stop turning highlighted fixtures on selection to 100%. What have I done?

Thanks for your help 🙂

Mark Seibert

---

<div class="post-metadata">

**Author:** ![trooper4028](https://sea2.discourse-cdn.com/flex016/user_avatar/vistaforum.chroma-q.com/trooper4028/32/302_2.png) [@trooper4028](https://vistaforum.chroma-q.com/u/trooper4028)\
**Post date:** [February 10, 2019, 4:20pm UTC](https://vistaforum.chroma-q.com/t/question-about-highlighting-a-fixture/627/2 "2019-02-10T16:20:15Z")

</div>

you most likely have “high-lite” turned on by accident turn it off in the top tool-bar

---

<div class="post-metadata">

**Author:** ![MarkSeibert](https://avatars.discourse-cdn.com/v4/letter/m/76d3ee/32.png) [@MarkSeibert](https://vistaforum.chroma-q.com/u/MarkSeibert)\
**Post date:** [February 10, 2019, 8:17pm UTC](https://vistaforum.chroma-q.com/t/question-about-highlighting-a-fixture/627/3 "2019-02-10T20:17:57Z")

</div>

Thanks for the response. I will look into that. After restarting this morning, apparently everything is back to normal - go figure.

Thanks again for your help 🙂

---

<div class="post-metadata">

**Author:** ![trooper4028](https://sea2.discourse-cdn.com/flex016/user_avatar/vistaforum.chroma-q.com/trooper4028/32/302_2.png) [@trooper4028](https://vistaforum.chroma-q.com/u/trooper4028)\
**Post date:** [February 10, 2019, 8:36pm UTC](https://vistaforum.chroma-q.com/t/question-about-highlighting-a-fixture/627/4 "2019-02-10T20:36:16Z")

</div>

You might want to turn it on and see if that’s what it was then you don’t have to restart vista if you have the problem again