# Hot Power vs Snap Start

**URL:** <https://vistaforum.chroma-q.com/t/hot-power-vs-snap-start/3377>\
**Category:** How do I ...?\
**Created:** [November 5, 2024, 10:43pm UTC](https://vistaforum.chroma-q.com/t/hot-power-vs-snap-start/3377 "2024-11-05T22:43:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![NoobOfNoobs](https://sea2.discourse-cdn.com/flex016/user_avatar/vistaforum.chroma-q.com/noobofnoobs/32/1087_2.png) [@NoobOfNoobs](https://vistaforum.chroma-q.com/u/NoobOfNoobs)\
**Post date:** [November 5, 2024, 10:43pm UTC](https://vistaforum.chroma-q.com/t/hot-power-vs-snap-start/3377/1 "2024-11-05T22:43:40Z")

</div>

I’m wondering what is the difference between these two curve types? The Vista 3 User Guide says the same thing for both curves: “The feature goes to the end state immediately.” Thanks!

---

<div class="post-metadata">

**Author:** ![jack.moorhouse](https://sea2.discourse-cdn.com/flex016/user_avatar/vistaforum.chroma-q.com/jack.moorhouse/32/439_2.png) [@jack.moorhouse](https://vistaforum.chroma-q.com/u/jack.moorhouse)\
**Post date:** [November 6, 2024, 10:25am UTC](https://vistaforum.chroma-q.com/t/hot-power-vs-snap-start/3377/2 "2024-11-06T10:25:58Z")

</div>

Absolutely nothing 😛  
They both “snap start”