# Control flash bump intensity with fader

**URL:** <https://vistaforum.chroma-q.com/t/control-flash-bump-intensity-with-fader/2793>\
**Category:** How do I ...?\
**Created:** [February 1, 2023, 12:13am UTC](https://vistaforum.chroma-q.com/t/control-flash-bump-intensity-with-fader/2793 "2023-02-01T00:13:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dean](https://avatars.discourse-cdn.com/v4/letter/d/3be4f8/32.png) [@dean](https://vistaforum.chroma-q.com/u/dean)\
**Post date:** [February 1, 2023, 12:13am UTC](https://vistaforum.chroma-q.com/t/control-flash-bump-intensity-with-fader/2793/1 "2023-02-01T00:13:04Z")

</div>

I have a flash bump for bass drops where I have the intensity snap up and fade to a live timer. Sometimes I don’t want the brightness to be the same intensity every time I push the button so I want to be able to change the max intensity with a fader. Is this possible? If so, how could I achieve this?

---

<div class="post-metadata">

**Author:** ![jack.moorhouse](https://sea2.discourse-cdn.com/flex016/user_avatar/vistaforum.chroma-q.com/jack.moorhouse/32/439_2.png) [@jack.moorhouse](https://vistaforum.chroma-q.com/u/jack.moorhouse)\
**Post date:** [February 2, 2023, 2:34pm UTC](https://vistaforum.chroma-q.com/t/control-flash-bump-intensity-with-fader/2793/2 "2023-02-02T14:34:03Z")

</div>

It depends how you have programmed it.  
If it’s two cues that flash and then decay (using autofollow) - you could just pull the intensity fader back.

The “Flash” button/behavior itself wouldn’t work, since this actually plays the cuelist, so it would end up latching on.  
If you did want to use the “flash” button, I would use a group “inhibit -” fader to pull back the intensity of the flash