# Art-Net connection issue

**URL:** <https://vistaforum.chroma-q.com/t/art-net-connection-issue/1735>\
**Category:** Vista 3 Betas\
**Created:** [October 11, 2020, 6:10pm UTC](https://vistaforum.chroma-q.com/t/art-net-connection-issue/1735 "2020-10-11T18:10:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Aleksey](https://avatars.discourse-cdn.com/v4/letter/a/bc8723/32.png) [@Aleksey](https://vistaforum.chroma-q.com/u/Aleksey)\
**Post date:** [October 11, 2020, 6:10pm UTC](https://vistaforum.chroma-q.com/t/art-net-connection-issue/1735/1 "2020-10-11T18:10:20Z")

</div>

I have a few fixtures connected by art-net. In previous version Vista I have no problem on it. But on Beta I see only one connected fixture and on each boot program shows me only one random ip-address instead 16 physical connected fixtures. In Beta and official Vista 3 i have same parameters of network. Is it bug or I did something wrong?

---

<div class="post-metadata">

**Author:** ![jack.moorhouse](https://sea2.discourse-cdn.com/flex016/user_avatar/vistaforum.chroma-q.com/jack.moorhouse/32/439_2.png) [@jack.moorhouse](https://vistaforum.chroma-q.com/u/jack.moorhouse)\
**Post date:** [October 12, 2020, 12:39pm UTC](https://vistaforum.chroma-q.com/t/art-net-connection-issue/1735/2 "2020-10-12T12:39:25Z")

</div>

Hi Aleksey,

There has been no networking change from R2 to R3.

Please submit a [https://www.vistabychromaq.com/vista-by-chroma-q-support-request/](https://www.vistabychromaq.com/vista-by-chroma-q-support-request/) with information on your system, including all IP addresses, subnet masks and network topology.

A setting to double check is your broadcast address. Try changing this to “subnet directed” if it is not already.

![image](https://us1.discourse-cdn.com/flex016/uploads/chroma_q/original/1X/3c37474762b3c3de3af6452123928a5724ceadc7.png)